HAILEGE H-A-1645 Printer Stepper Motor Driver Cnc Shield 7445046261245 3D V4 Engraving Expansion

( Brand: Hailege ), ( Manufacturer Part Number: H-A-1645 ), ( Part Type: Shield Motor Driver ), ( Package Dimensions: 4.53 X 3.15 X 0.98 Inches; 2.36 Ounces ), ( UPC: 445046261245 )

Review HAILEGE 2pcs 3d Printer Stepper Motor Driver Cnc Shield V4 Engraving Machine Expansion

The Hailege H-A-1645 3D Printer Stepper Motor Driver CNC Shield V4 Engraving Expansion is an advanced add-on board designed to enhance the functionality of your 3D printer or CNC machine. This versatile shield is based on the powerful TMC2130 stepper motor driver chip and is compatible with various Arduino boards, such as Arduino Mega 2560, Arduino Mega R3, and Arduino Due.

The H-A-1645 CNC Shield V4 boasts 4 independent channels, each capable of driving a stepper motor with high current capacity and high torque. The TMC2130 driver chips offer microstepping from 1/16 to 1/256 steps, yielding precise motion control and excellent print quality in your 3D printing projects or engraving tasks.

Several advanced features are integrated into this CNC Shield. It supports auto-calibration to ensure accurate motor adjustment, spindle protection in case of over-current situations, and thermal runaway prevention, all contributing to reliable and safe operation.

Communication between the shield and your microcontroller is established via SPI and UART interfaces. The shield features test switches and LED diagnostics for motor, direction, chip enable, and run LED, which facilitate quick troubleshooting and configuration. The shield can also be used in both 5V and 3.3V applications, making it a convenient solution for various 3D printers and CNC machines.

Comprehensive gold-plated pins are used for connecting the stepper motors, allowing for secure connectivity and good electrical contact. The shield is suffused with extensive ground planes to improve thermal conductivity and minimize electromagnetic interference.

With the Hailege H-A-1645 3D Printer Stepper Motor Driver CNC Shield V4 Engraving Expansion, you'll unlock new possibilities for precision, control, and versatility in your 3D printing and CNC engraving projects.

Buying Hailege H-A-1645 3D Printer Stepper Motor Driver CNC Shield V4: Pros, Cons, and Recommendation

The Hailege H-A-1645 3D Printer Stepper Motor Driver CNC Shield V4 is a popular expansion board suitable for those who want to upgrade their 3D printer's capabilities for CNC engraving. In this analysis, we will discuss its advantages, disadvantages, and recommendations to help you make an informed decision before buying.

1. Expandable: The CNC Shield V4 is easily expandable, allowing users to add various features, such as coolers, heater cartridges, touch screens, and much more.

2. Multiple Stepper Motor Drivers: The Hailege H-A-1645 board comes with six high-performance stepper motor drivers that can handle more powerful motors and increase the printing area.

3. Versatile: This shield is compatible with various 3D printers, Arduino boards, and controller boards likeix32, Smoothieware, GRBL, RAMPS, Melzi, and Ramps 1.4.

4. Precise Control:With support for various controllers and microcontrollers, you can enjoy precise control over the movements, helping you create consistently high-quality prints and engravings.

1. Limited Documentation: There might be limited documentation and setup guides available, making the installation process slightly more complicated for beginners.

2. Additional Cost: Upgrading your existing 3D printer with this expansion board may require additional expenditures for components like stepper motors, cooling fans, and heater cartridges.

3. Hardware Compatibility: It is crucial to ensure that the components you intend to add are compatible with the CNC Shield V4 before making a purchase to avoid any unexpected issues.

If you are looking to expand your 3D printer's capabilities to support engraving, the Hailege H-A-1645 3D Printer Stepper Motor Driver CNC Shield V4 is a robust and versatile solution. However, we recommend that you are prepared for a more complex installation process and have a good understanding of the hardware requirements for your project. To make the most out of your purchase, be sure to carefully read the available documentation and verify compatibility with all components before heading to checkout. With proper preparation, the benefits and capabilities of this expansion board can definitely outweigh its limitations.

Details:

3D printer stepper motor driver CNC shield V4 needs to work with Nano board. GRBL compatible, Worked with nano, released the digital IO interface, easy to connect other modules, such as ENDSTOP. It can be used as driver expansion board for engraving and 3D printers. Compatible with micro-drive laser engraving machine, three-axis CNC machine.

2Pcs 3D Printer Stepper Motor Driver CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano A4988:: Item model number H-A-1645, Package Dimensions 4.53 x 3.15 0.98 inches; 2.36 ounces, Manufacturer Hailege.

specifications steppertrol:

• brand: Hailege
• mpn: H-a-1645
• part type: Shield Motor Driver
• package dimensions: 4.53 X 3.15 X 0.98 Inches; 2.36 Ounces
• upc: 445046261245

returns steppertrol:

• method: Money back
• time: 30 Days
• paid by: Seller
• policy: Returns Accepted

general steppertrol:

• condition: New
• Drives Starters > Drives Motor Controls > Stepper Controls Drives

shipping steppertrol:

• cost: $0.00
• transit: 4-10 Days
• type: Fixed
• service: Standard
• class: Standard

offer steppertrol:

• availability: In Stock
• sold: 0
• started: January 31, 2025
• options: Ship-to-home
• quantity: 1

payments steppertrol:

• other
• credit card: Discover
• wallet: Paypal

seller steppertrol:

• # reviews: 2
• rating: 100.0%
• city: Denver, Colorado