SPARKFUN ROB-09670 Bridge Motor Driver UK1122 L298 2-AXIS 5V 2X2A
( Brand: Sparkfun ), ( Manufacturer Part Number: ROB-09670 ), ( Model: UK1122 ), ( Part Type: Motor Driver ), ( Run Method: H-bridge ), ( Input Voltage: 5v ), ( Application: Dual Axis )
Review SPARKFUN H bridge Motor Driver 2-axis 5v
The SparkFun ROB-09670 is a versatile 2-axis DC motor driver carrier for the Texas Instruments L298N dual full-bridge motor driver IC. This conveniently packaged motor driver can be used to control two DC motors with up to 2A of continuous current each. Each motor can be driven in two different directions, making it a great solution for 2-wheel differential drive robot applications.
The L298N motor driver is capable of accepting both 5V and 12V logic signals and can provide output voltages up to 36V. The carrier board includes a 1A 5V 3.3 terminal block for powering the motor driver logic and a 2A 5V terminal block for powering the motors. Additionally, four terminal blocks are provided for connecting the motors, two for each motor's power, ground, and direction pins.
The ROB-09670 features an adjustable current limiting resistor for each motor output, allowing you to set the current limit to meet your specific application requirements. Two PWM pins are also included on the board for speed control of each motor. The motor driver also includes a thermal shutdown mechanism to protect against overheating.
This motor driver carrier is a surface-mount technology (SMT) component assembled on a PCB, and it comes with a fully assembled and tested PCB and a 1x2 pin header for connecting the ICSP (In-Circuit Serial Programming) pins. A schematic diagram and a bill of materials are included in the product documentation to help with customization and integration into your project.
The compact size of the ROB-09670, along with its ease of use and robust features, makes it an excellent choice for various robotics and motor control applications. Whether you're building a simple robot or a complex robotic system, the SparkFun ROB-09670 UK1122 L298N 2-axis DC motor driver carrier is an ideal solution for your project.
The SparkFun ROB-09670 UK1122 L298N 2-Axis H-Bridge Motor Driver is a popular motor controller for hobbyists and DIY projects. Here are some pros and cons of buying this motor driver:
Pros:1. Dual Full-Bridge Motor Drivers: This motor driver can control two DC motors independently, making it suitable for 2-axis projects.
2. Easy to Use: The L298N IC is known for its simplicity and ease of use. It has built-in protection features like over-current and over-voltage protection, making it a safe choice for beginners.
3. Wide Operating Voltage: The motor driver can operate with a voltage range of 4.5V to 36V, providing flexibility in power source selection.
4. Compact Size: With a small form factor, this motor driver can be easily integrated into various projects.
5. Available Shield for Arduino: SparkFun offers a shield version of this motor driver for Arduino, making it easier to interface with microcontrollers.
Cons:1. Limited Current Capacity: The maximum continuous current for each motor channel is only 2A. For high-power applications, a more powerful motor driver may be required.
2. No Acceleration Control: This motor driver does not provide acceleration or deceleration control, which may be necessary for more complex projects.
3. No Protection Against Reverse Voltage: The motor driver does not have a reverse voltage protection feature, which could potentially damage the motor or the motor driver in certain applications.
4. Limited Input Voltage for Logic Level Shifting: The logic level shifter on the motor driver can only handle up to 6V, which may limit the use of certain power sources or microcontrollers.
Conclusion:The SparkFun ROB-09670 UK1122 L298N 2-Axis H-Bridge Motor Driver is a versatile and easy-to-use motor controller for hobbyists and DIY projects. It offers the ability to control two DC motors independently and can handle a wide range of operating voltages. However, it has limitations in terms of current capacity, acceleration control, reverse voltage protection, and input voltage for logic level shifting. Depending on the specific requirements of your project, a more powerful or feature-rich motor driver may be necessary.
Recommendation:If you are looking for a simple and easy-to-use motor driver for small to medium-sized projects, the SparkFun ROB-09670 UK1122 L298N 2-Axis H-Bridge Motor Driver is a good choice. However, if you require more current capacity, acceleration control, or reverse voltage protection, you may want to consider a more powerful or feature-rich motor driver. Additionally, make sure to select a compatible power source and microcontroller for your project.
Details:
SparkFun ROB-09670 UK1122 L298 H-Bridge Motor Driver 2-Axis 5V 2x2A.
part #: rob09670 prices
- $14.90-$30.00
specifications steppertrol:
- brand: Sparkfun
- mpn: Rob-09670
- model: Uk1122
- part type: Motor Driver
- run method: H-bridge
- input voltage: 5v
- application: Dual Axis
seller steppertrol:
- # reviews: 2
- city: Los Angeles, California
- rating: 0.0%
shipping steppertrol:
- carrier: USPS
- cost: $5.97
- transit: 6-10 Days
- service: USPS Ground Advantage
- type: Calculated
- class: Standard
payments steppertrol:
- other
- wallet: Paypal
- credit card: Visa
- money order
general steppertrol:
- condition: New Open box
- Drives Starters > Drives Motor Controls > Stepper Controls Drives
returns steppertrol:
- policy: No Returns
offer steppertrol:
- started: June 6, 2026
- best offers: True
- availability: In Stock
- quantity: 1
- options: Ship-to-home
- sold: 0
Sparkfun ROB-09670 Is Similar To:
- Sparkfun Bob-13752 Auto Driver Stepper Motor L6470 (46.2% similar) 7-YY5L-46029-GX. Sparkfun BOB-13752 auto driver stepper motor L6470. Shipping services...(May 17th, 2024)
